Tuesday, February 16, 2016

The Land of the Living

Ok, so that innocent little cold I thought I was already getting over? Early last week, it exploded like a Peep in the microwave and kicked my butt instead. And aside from putting out a few fires for work, I basically just camped out in bed. It sort of reminded me of that time back in grad school when I regularly fell asleep with books on my face.


Yup. Kinda like that.

I guess that's the thing when it comes to trying to juggle a schedule like mine: I'm not always prepared or ready to slow down. I have found that scheduling little breaks and vacations in between big projects helps a lot to keep some random little virus from staging a coup on my immune system -- but every now and then, it's human nature to turn into an ick monster for a few days, and all of the normal-life-pace stuff has to stop. Or at least, I do... even as my inbox grows and threatens to knock over buildings in Tokyo.*


Still, the world kind of went on doing its own thing without me for a few days, which also included a pretty aggressive storm and broke part of my backyard fence. After some of the recent fixes I've had to do this winter, I couldn't help but wonder how I still manage to break things even in my sleep. That's gotta be some kind of weird talent that wins cash prizes on TV shows, right? Asking for a friend who now has an even tinier home repair budget.


broken fence latch


But as I was walking around the yard, I noticed a few other things, such as how the hellebore I planted last year is going strong on one side of the patio door. I purposely planted these so that I'd still have some white and green winter blooms while everything else takes a nap, and as you can see, the plan is going perfectly... except that the one on the other side of the patio door died. So, I'm at a 50/50 success rate on these (not unlike my usual success rate with plants, so the experimentation continues).


hellebore


Also: I'm starting to draft some plans up for how I'm going to turn this boring old tree in the center of my yard into a spot that looks more welcoming. Charlie sometimes digs and also takes out most of the growth whenever she has to be leashed, so I think a circular bench would be a good project, especially after completing the garden beds last year on the side. SO many more plans for the back yard this year, so I am hoping for an early spring!


tree bench


And last but not least, I have a surprise yard crasher near my A/C unit. It looks like the neighbor's magnolia tree took it upon itself to spread the love over to my side, so I'll have to replant this in a less potentially problematic spot (probably in the front, where it could get plenty of sun since removing one of the old pine trees). It would be yet another white flower blooming in the yard (and magnolia leaves are amazing for all sorts of other decor and smell amazing), so I'm going to try to save it and get it growing!


new magnolia


That's about it for the happenings this past week, which means I'm feeling the itch to catch up and start building something again. Stay tuned for a new light fixture DIY, some more window trim completion, and tips on how to stretch a dollar on your hot water heater!


*Honestly, the thing that took me the longest to write with this post was deciding whether to make a King Kong or Godzilla reference here. So now you understand a little more about how my brain was working today.


The post The Land of the Living appeared first on The Ugly Duckling House.


Website // Subscribe // Advertise // Twitter // Facebook // Google+


Wednesday, February 3, 2016

Adding Trim to the Living Room Windows

DONE! Ahh. I love that word, don't you?


Too bad it so rarely happens in this house. Anyway, I am here to simply report that the trim-- also known as "window casing"-- that I've been meaning to add to the living room windows is finally up and nailed into place!


living room windows


It's not a large or complicated project by any means, but considering I've been having to step over a pile of window casing in my hallway since before Christmas, I'm glad to get rid of… well… I guess not very much of it. There's still a pile, only less contained in plastic wrap, since I bought enough to finish off the rest of the upstairs rooms as well (purchasing in bulk = bulk discount).


window casing


Getting the casing up does have some significance though: it means that every window on the first floor of the house now has completed trim, and that's a pretty nice line item to draw through on my to-do list!


Since family members have helped me with this type of project in the past, I did this one solo and snapped a few pics with my phone as I went, just so that I could share a few things as I knocked it out.



  • This was in a bay window, so I first shoved all of the furniture that I positioned there during Christmas out of the way to make more room for the air compressor and ladder. The new tree had some difficulty getting boxed up in its original package, so it's hanging out in the middle of the living room until I get a bin large enough for storage (classy, I know).


living room windows before



  • As always, my trusty project supervisor was around to make sure the job got done and sit precariously under my feet at all times.


charlie always in the way



  • This is an easy project because it doesn't involve a lot of complex math; I just measured the length of each window and made sure to remind myself that it's the shorter part of the 45-degree angles, then fit the top piece into the void that creates.


closeup window trim



  • Because I had a cold and I've started to notice how dry my throat was getting, I wore a mask pretty much the whole time I did this project. I've noticed that if I even have the slightest bit of a cold looming not to chance it with the sawdust (I mean, you're supposed to wear the mask anyway for safety while cutting, but I guess I take special notice of it when I know how miserable I'll make myself the next day without one).


wearing mask



  • For a project like this, I needed just a few tools: a miter saw (doesn't even have to be a compound miter, mine isn't), a tape measure, a pencil, and a nail gun with finishing nails (I typically have 1″ and 2 or 2 1/2″ varieties strewn about the house during various projects, so I used the longer ones for this). I also eventually grabbed a small putty knife. Brad nails can work too for something as lightweight as door/window casing, but for anything heavier like baseboard or crown, it's recommended to use finishing nails.


nail gun



  • During one of my first years attending the Haven Conference, my pals Sandra and Brittany did a crown molding class where I learned that a nifty trick to make sure the molding would stay put for the long haul was to drive the nails in opposite angles as you nail along the trim. Meaning, drive one in a slightly upward angle, the next downward, the next either upward again or to the left, and so on. The lack of being able to pull them all out in a single direction prevents the trim from simply reversing straight out of the holes you've just created (walls and windows flex and shift over time and temperature, so it seemed like a good idea!).


nail different directions



  • My walls and windows are super uneven and bumpy in places (especially the corners), and that led to a lot of problem-solving on the fly. For example, a heavy mallet helped to flatten out uneven bits where the previous owner had unsuccessfully patched and painted over lumps from (I assume) worn-out nail holes of previous window treatments. Sure, it caused some cracks in the surface of the paint when I got aggressive, but all of that got covered over by the new (and flatter-positioned) trim, so it's not visible.


ladder and mallet



  • Because of uneven drywall lumps, there were moments when the top piece of trim wouldn't 100% line up with the side pieces (one would sort of "sink" into the wall more than the other). I either wouldn't notice this prior to trying to install or the mallet didn't get it completely flat, so I still had to finesse things a bit. This was when I grabbed a putty knife to slide under the trim and edge the sunken one out a bit to be flush with the other piece. Once I got the nails in, things stayed secure, but cardboard drywall shims (or just a random thin piece of cardboard if you live in a house like mine where it seems to multiply on its own) can also help to add a little something behind the uneven piece and bring it forward (usually this is far easier than trying to smack the one jutting out further against the drywall… you'd risk damaging the trim).


adjust depth window casing



  • I also wound up edging the trim ever so slightly off from the edge of the window where it met the drywall. I mainly did this because I knew that the line itself wouldn't be straight all the way down from the top of the window to the bottom, and this gave me some wiggle room. Once it's all caulked and painted, the edges won't be noticeable at all.


window casing edge



  • I debated for a bit on whether I should try installing the trim in order of SIDE-TOP-SIDE or SIDE-SIDE-TOP (the bottom sill pre-existed on all windows), and I eventually figured out that it was far easier for me to get both the left and right sides done and then insert the piece on top (less measuring and math). Much like with crown, cutting the longest pieces first is a decent way to go.



  • Speaking of sides, I found that once it came time to fit the piece on top, it worked out best to cut one 45-degree angle on the harder-to cut end (since I'm right-handed, cutting the angle on the left side of my miter saw made for a more awkward cut since my saw opens to the left and obscures the blade a bit as I'm cutting) and then make adjustments from the other, easier-to-cut side. And ONLY to make cuts on a single side of the trim rather than confuse myself and cut the wrong end. If you try this yourself, remember that it's always easier to cut a piece that's slightly too long and trim off a blade's width at a time to get it to fit rather than trying to get it right on the first try and coming up short (small brag: I managed to get an exact cut on the first try twice, but it was purely by accident because I thought I was cutting it slightly too long and wound up being wrong… so just goes to show you that cutting slightly longer than you think you need is better!).


tight corner window casing


So, here's a very subtle before n' after for ya:


living room windows before

window casing after

Next steps are to of course fill in holes and caulk everything (and then add a few curtains), but it's a nice accomplishment for a week where I nursed a cold and really didn't feel like getting off the couch! What have you been up to this week?


The post Adding Trim to the Living Room Windows appeared first on The Ugly Duckling House.


Website // Subscribe // Advertise // Twitter // Facebook // Google+